Blumax Speech 002 Bluetooth Car Kit.

Original Carcomm CMPC-101 holder for HP IPAQ RW6815. A simple and a safe place for your HP IPAQ RW6815 phone during the drive.

Active Brodit holder for the HP iPAQ rz17xx. Holder with cable plug attachment.
Fits all cables.
The cable is easy to attach to the holder, and then the cable connects to the phone automatically when you put your phone in the holder so you do not have to connect it manually each time. (Cable not included)

Active Brodit holder for the TomTom GO 520.

Brodit passiv holder for Compaq iPAQ 36xx.
Brodit passiv holder for the Compaq iPAQ 36xx. With your Compaq iPAQ 36xx a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. You can connect e.g. a charging cable to the Compaq iPAQ 36xx when it is in the holder.

Brodit passiv holder for Compaq iPAQ 36xx.
Brodit passiv holder for the Compaq iPAQ 36xx. With your Compaq iPAQ 36xx a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. You can connect e.g. a charging cable to the Compaq iPAQ 36xx when it is in the holder.

Active Brodit holder for the Compaq iPAQ 38xx.
An active holder which is connected behind the dashboard, provides a nice installation without cables hanging over the dashboard! You can also use the power adapter for GPS receiver or other own solutions (can not be used for data communication or audio connection). The power supply runs at 24 / 12 volts. The product is E-market. Holder is mounted on a ball joint which can be rotated so that you can easily adjust your mobile phone to avoid light reflection. This includes mounted ProClip Mounting Platform. ProClip is a mounting bracket which is car specific.

Aktiv Brodit holder with speaker for the Compaq iPAQ 38xx.
With built in connector. With tilt swivel. Not expansionpack.

Active Brodit holder for the Compaq iPAQ 38xx.

Active Brodit holder for the Compaq iPAQ 38xx.

Active Brodit holder for the Compaq iPAQ 38xx. Holder with cable plug attachment.
Fits all cables.
The cable is easy to attach to the holder, and then the cable connects to the phone automatically when you put your phone in the holder so you do not have to connect it manually each time. (Cable not included)

Aktiv Brodit holder with speaker for Compaq iPAQ 38xx.
Active holder with cigg-plug. With tilt swivel. 12/24 Volt. Not expansionpack.

Active Brodit holder for the HP iPAQ 100.

Brodit passiv holder for the HP iPAQ 100 Series. With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.

Active Brodit holder for the HP iPAQ 100, 110 111. The active holder charges your battery when it is in the holder. You need to connect the charging device to the device manually each time you put the device in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle´s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Active Brodit holder for the HP iPAQ 200. The active holder charges your battery when it is in the holder. You need to connect the charging device to the device manually each time you put the device in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle´s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Active Brodit holder for the HP iPAQ 200.

Brodit passiv holder for the HP iPAQ 200 Series. With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.

Brodit passiv holder for the HP iPaq 2210, 2215. With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.

Brodit passiv holder for the HP iPaq 31-55xx. With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.

Original HP iPaq 3800, 3830, 3875 HR air vent mount.
HR Air Vent Mount with Swivelball for the ventilation shaft in your car.

Active Brodit holder for the HP iPAQ 39xx.

Active Brodit holder for the HP iPAQ 39xx. The active holder charges your battery when it is in the holder. You need to connect the charging device to the device manually each time you put the device in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle´s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Original HP iPaq 500 510 512 Air Vent Mount - Haicom

Active Brodit holder for the HP iPAQ 500. The active holder charges your battery when it is in the holder. You need to connect the charging device to the device manually each time you put the device in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle´s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Active Brodit holder for the HP iPAQ 500.

Active Brodit holder for the HP iPAQ 500 Series.
An active holder which is connected behind the dashboard, provides a nice installation without cables hanging over the dashboard! You can also use the power adapter for GPS receiver or other own solutions (can not be used for data communication or audio connection). The power supply runs at 24 / 12 volts. The product is E-market. Holder is mounted on a ball joint which can be rotated so that you can easily adjust your mobile phone to avoid light reflection. This includes mounted ProClip Mounting Platform. ProClip is a mounting bracket which is car specific.

Brodit passiv holder for the HP iPAQ 500 Series. With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.

Active Brodit holder for the HP iPAQ 600 Business.

Active Brodit holder for the HP iPAQ 600 Business. The active holder charges your battery when it is in the holder. You need to connect the charging device to the device manually each time you put the device in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle´s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Active Brodit holder for the HP iPAQ 600 Business. The active holder charges your battery when it is in the holder. You need to connect the charging device to the device manually each time you put the device in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle´s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Brodit passiv holder for the HP iPAQ 600. With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.

Active Brodit holder for the HP iPAQ 600 Series Business Navigator.
An active holder which is connected behind the dashboard, provides a nice installation without cables hanging over the dashboard! You can also use the power adapter for GPS receiver or other own solutions (can not be used for data communication or audio connection). The power supply runs at 24 / 12 volts. The product is E-market. Holder is mounted on a ball joint which can be rotated so that you can easily adjust your mobile phone to avoid light reflection. This includes mounted ProClip Mounting Platform. ProClip is a mounting bracket which is car specific.

Brodit passiv holder for the HP iPAQ 600 Series Business Navigator. With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.

Active Brodit holder for the HP iPAQ 900 Business. The active holder charges your battery when it is in the holder. You need to connect the charging device to the device manually each time you put the device in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle´s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Active Brodit holder for the HP iPAQ 900 Business.

Active Brodit holder for the HP iPAQ 900 Series Business Messenger.
An active holder which is connected behind the dashboard, provides a nice installation without cables hanging over the dashboard! You can also use the power adapter for GPS receiver or other own solutions (can not be used for data communication or audio connection). The power supply runs at 24 / 12 volts. The product is E-market. Holder is mounted on a ball joint which can be rotated so that you can easily adjust your mobile phone to avoid light reflection. This includes mounted ProClip Mounting Platform. ProClip is a mounting bracket which is car specific.

Brodit passiv holder for the HP iPAQ 900 Series Business Messenger. With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.

Active Brodit holder for the HP iPAQ Data Messenger.

Active Brodit holder for the HP iPAQ Data Messenger. The active holder charges your battery when it is in the holder. You need to connect the charging device to the device manually each time you put the device in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle´s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Active Brodit holder for the HP iPAQ Data Messenger.

Brodit passiv holder for the HP iPAQ Data Messenger. With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.

Active Brodit holder for the HP iPAQ h19xx.

Active Brodit holder for the HP iPAQ h19xx.
An active holder which is connected behind the dashboard, provides a nice installation without cables hanging over the dashboard! You can also use the power adapter for GPS receiver or other own solutions (can not be used for data communication or audio connection). The power supply runs at 24 / 12 volts. The product is E-market. Holder is mounted on a ball joint which can be rotated so that you can easily adjust your mobile phone to avoid light reflection. This includes mounted ProClip Mounting Platform. ProClip is a mounting bracket which is car specific.

Brodit passiv holder for the HP iPAQ h19xx. With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.

Original HP iPAQ h2210, h2215 HR air vent mount.
HR Air Vent Mount with Swivelball for the ventilation shaft in your car.

Active Brodit holder for the HP iPAQ h22xx.

Active Brodit holder for the HP iPAQ h22xx. The active holder charges your battery when it is in the holder. You need to connect the charging device to the device manually each time you put the device in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle´s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Active Brodit holder for the HP iPAQ h22xx.
An active holder which is connected behind the dashboard, provides a nice installation without cables hanging over the dashboard! You can also use the power adapter for GPS receiver or other own solutions (can not be used for data communication or audio connection). The power supply runs at 24 / 12 volts. The product is E-market. Holder is mounted on a ball joint which can be rotated so that you can easily adjust your mobile phone to avoid light reflection. This includes mounted ProClip Mounting Platform. ProClip is a mounting bracket which is car specific.

Active Brodit holder for the HP iPAQ h22xx. Holder with cable plug attachment.
Fits all cables.
The cable is easy to attach to the holder, and then the cable connects to the phone automatically when you put your phone in the holder so you do not have to connect it manually each time. (Cable not included)

Active Brodit holder for the HP iPAQ h22xx.

Brodit passiv holder for the HP iPAQ h22xx. With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.

Active Brodit holder for the HP iPAQ h24xx. The active holder charges your battery when it is in the holder. You need to connect the charging device to the device manually each time you put the device in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle´s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Active Brodit holder for the HP iPAQ h24xx.

Active Brodit holder for the HP iPAQ h41xx.

Active Brodit holder for the HP iPAQ h41xx.

Active Brodit holder for the HP iPAQ h41xx. Holder with cable plug attachment.
Fits all cables.
The cable is easy to attach to the holder, and then the cable connects to the phone automatically when you put your phone in the holder so you do not have to connect it manually each time. (Cable not included)

Active Brodit holder for the HP iPAQ h41xx.
An active holder which is connected behind the dashboard, provides a nice installation without cables hanging over the dashboard! You can also use the power adapter for GPS receiver or other own solutions (can not be used for data communication or audio connection). The power supply runs at 24 / 12 volts. The product is E-market. Holder is mounted on a ball joint which can be rotated so that you can easily adjust your mobile phone to avoid light reflection. This includes mounted ProClip Mounting Platform. ProClip is a mounting bracket which is car specific.

Brodit passiv holder for the HP iPAQ h41xx. With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.

Active Brodit holder for the HP iPAQ h43xx.
An active holder which is connected behind the dashboard, provides a nice installation without cables hanging over the dashboard! You can also use the power adapter for GPS receiver or other own solutions (can not be used for data communication or audio connection). The power supply runs at 24 / 12 volts. The product is E-market. Holder is mounted on a ball joint which can be rotated so that you can easily adjust your mobile phone to avoid light reflection. This includes mounted ProClip Mounting Platform. ProClip is a mounting bracket which is car specific.

Active Brodit holder for the HP iPAQ h43xx. Holder with cable plug attachment.
Fits all cables.
The cable is easy to attach to the holder, and then the cable connects to the phone automatically when you put your phone in the holder so you do not have to connect it manually each time. (Cable not included)

Active Brodit holder for the HP iPAQ h43xx.

Active Brodit holder for the HP iPAQ h43xx.

Brodit passiv holder for the HP iPAQ h43xx. With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.

Active Brodit holder for the HP iPAQ h47xx.

Active Brodit holder for the HP iPAQ h47xx. The active holder charges your battery when it is in the holder. You need to connect the charging device to the device manually each time you put the device in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle´s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Active Brodit holder for the HP iPAQ h55xx.

Active Brodit holder for the HP iPAQ h55xx. Holder with cable plug attachment.
Fits all cables.
The cable is easy to attach to the holder, and then the cable connects to the phone automatically when you put your phone in the holder so you do not have to connect it manually each time. (Cable not included)

Active Brodit holder for the HP iPAQ h63xx. Holder with cable plug attachment.
Fits all cables.
The cable is easy to attach to the holder, and then the cable connects to the phone automatically when you put your phone in the holder so you do not have to connect it manually each time. (Cable not included)

Active Brodit holder for the HP iPAQ h63xx.
An active holder which is connected behind the dashboard, provides a nice installation without cables hanging over the dashboard! You can also use the power adapter for GPS receiver or other own solutions (can not be used for data communication or audio connection). The power supply runs at 24 / 12 volts. The product is E-market. Holder is mounted on a ball joint which can be rotated so that you can easily adjust your mobile phone to avoid light reflection. This includes mounted ProClip Mounting Platform. ProClip is a mounting bracket which is car specific.

Active Brodit holder for the HP iPAQ h63xx.

Active Brodit holder for the HP iPAQ h63xx. The active holder charges your battery when it is in the holder. You need to connect the charging device to the device manually each time you put the device in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle´s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Brodit passiv holder for the HP iPAQ h63xx. With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.

Active Brodit holder for the HP iPAQ h65xx.

Active Brodit holder for the HP iPAQ h69xx.

Active Brodit holder for the HP iPAQ hw65xx.

Active Brodit holder for the HP iPAQ hw65xx.

Active Brodit holder for the HP iPAQ hw65xx.

Active Brodit holder for the HP iPAQ hw65xx.
An active holder which is connected behind the dashboard, provides a nice installation without cables hanging over the dashboard! You can also use the power adapter for GPS receiver or other own solutions (can not be used for data communication or audio connection). The power supply runs at 24 / 12 volts. The product is E-market. Holder is mounted on a ball joint which can be rotated so that you can easily adjust your mobile phone to avoid light reflection. This includes mounted ProClip Mounting Platform. ProClip is a mounting bracket which is car specific.

Active Brodit holder for the HP iPAQ hw65xx. Holder with cable plug attachment.
Fits all cables.
The cable is easy to attach to the holder, and then the cable connects to the phone automatically when you put your phone in the holder so you do not have to connect it manually each time. (Cable not included)

Active Brodit holder for the HP iPAQ hw65xx. Holder with cable plug attachment.
Fits all cables.
The cable is easy to attach to the holder, and then the cable connects to the phone automatically when you put your phone in the holder so you do not have to connect it manually each time. (Cable not included)

Active Brodit holder for the HP iPAQ hw65xx.

Active Brodit holder for the HP iPAQ hw65xx.

Active Brodit holder for the HP iPAQ hw65xx.

Active Brodit holder for the HP iPAQ hw65xx.

Brodit passiv holder for the HP iPAQ hw65xx. With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.

Original HP Ipaq hw65xx, hw69xx Air Vent Mount - Haicom

Brodit passiv holder for the HP iPaq hw65xx, hw69xx. With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.

Active Brodit holder for the HP iPAQ hw69xx. The active holder charges your battery when it is in the holder. You need to connect the charging device to the device manually each time you put the device in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle´s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Active Brodit holder for the HP iPAQ hw69xx. The active holder charges your battery when it is in the holder. You need to connect the charging device to the device manually each time you put the device in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle´s cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Active Brodit holder for the HP iPAQ hx21xx.